Why are 9mm and 38.37 twist ratios different?
-
- Posts: 146
- Joined: 22 Nov 2015 05:52
- Location: In the mudness
- Has thanked: 1 time
- Been thanked: 32 times
Why are 9mm and 38.37 twist ratios different?
I have seen the same bullets listed to both calibers, or being not very far off (356 vs 357/358) from each other in diameter. However, 1:10 seems to be the standard twist ratio for 9x19 rounds while for 357/38 special the ratio ranges between 1:20. Rossi M92 being in the later group. I have been told in kitty school that bullet weight and length determines twist ratio for a given diameter. Am I missing something?
Re: Why are 9mm and 38.37 twist ratios different?
I think you've answered your own question there... bullet weight...
9mm is normally 115 or 124 gns, and quite a short bullet.... .38/.357 is normally 158gn and above...
9mm is normally 115 or 124 gns, and quite a short bullet.... .38/.357 is normally 158gn and above...
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Why are 9mm and 38.37 twist ratios different?
Yep, bullet weight as reflected in the length. And it's all black magic anyway
Make smoke,
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time ![Image](https://www.rossi-rifleman.com/images/smilies/icon_guntootsmiley.gif)
![Image](https://www.rossi-rifleman.com/images/smilies/icon_guntootsmiley.gif)
-
- Posts: 175
- Joined: 08 Feb 2018 15:20
- Location: Nashville, TN
- Has thanked: 8 times
- Been thanked: 96 times
Re: Why are 9mm and 38.37 twist ratios different?
That's a great question, and I'm not really sure of the answer. The calculations for spin-stabilizing a bullet seem to include equal parts art, science, and specific application.
For example, the M16 was initially designed with a twist rate of 1:14", which was *just* fast enough to keep the bullet stable in flight through air, but allowed it to tumble as soon as it struck an enemy soldier.
However, the twist was increased slightly to 1:12" soon after. When used in very cold weather conditions, the bullets had a lower velocity and therefore had a slower spin, making the bullet start to tumble sooner and lose accuracy.
When the standard bullet changed from M192 to the much longer & less dense M855, the twist rate increased again to 1:7"
I'm amazed at how bullets remain intact from the massive forces that are placed on them, and not just acceleration, either. If you run the calculations, a .223 bullet that's fired from a rifle at 3,000 feet/second through a 1:7" twist barrel is rotating at over 300,000 RPM!
For example, the M16 was initially designed with a twist rate of 1:14", which was *just* fast enough to keep the bullet stable in flight through air, but allowed it to tumble as soon as it struck an enemy soldier.
However, the twist was increased slightly to 1:12" soon after. When used in very cold weather conditions, the bullets had a lower velocity and therefore had a slower spin, making the bullet start to tumble sooner and lose accuracy.
When the standard bullet changed from M192 to the much longer & less dense M855, the twist rate increased again to 1:7"
I'm amazed at how bullets remain intact from the massive forces that are placed on them, and not just acceleration, either. If you run the calculations, a .223 bullet that's fired from a rifle at 3,000 feet/second through a 1:7" twist barrel is rotating at over 300,000 RPM!
-
- Posts: 146
- Joined: 22 Nov 2015 05:52
- Location: In the mudness
- Has thanked: 1 time
- Been thanked: 32 times
Re: Why are 9mm and 38.37 twist ratios different?
But the so-called defense rounds, such as Remington HTP .357 Magnum 110 Grain SJHP and Remington Golden Saber .357 Magnum 125 Grain JHP, have lighter bullets. So we are in the same domain as common 9mm (115) and NATO (124)Daryll wrote:I think you've answered your own question there... bullet weight...
9mm is normally 115 or 124 gns, and quite a short bullet.... .38/.357 is normally 158gn and above...
So, if we assume the Rossi M92 was designed to shoot 158gr and heavier bullets, shouldn't its twist ration be higher than the 1:20, being closer to the 1:10 from 9mm?Nashville Stage wrote:THowever, the twist was increased slightly to 1:12" soon after. When used in very cold weather conditions, the bullets had a lower velocity and therefore had a slower spin, making the bullet start to tumble sooner and lose accuracy.
When the standard bullet changed from M192 to the much longer & less dense M855, the twist rate increased again to 1:7"
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Why are 9mm and 38.37 twist ratios different?
The current catalog does not list the rate of twist for the 92, but it has always been 1:30.
Michael
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)
- GasGuzzler
- Moderator
- Posts: 2755
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: Why are 9mm and 38.37 twist ratios different?
Remington HTP .357 Magnum 110 Grain SJHP and Remington Golden Saber .357 Magnum 125 Grain JHP are an insult to the .357 cartridge. They are also moving faster than a 9X19.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.