Extractor Failure 410
-
- Posts: 91
- Joined: 15 Oct 2013 16:50
- Location: Green Bay WI
- Has thanked: 16 times
- Been thanked: 10 times
Extractor Failure 410
yup....tweek a little piece of pot metal too many times and....snap. gonna try to get a Marlin extractor now......don't have a choice really.
-
- Posts: 91
- Joined: 15 Oct 2013 16:50
- Location: Green Bay WI
- Has thanked: 16 times
- Been thanked: 10 times
Re: Extractor Failure 410
go to order one online at USA Midway and they are back ordered....uggghhhhh
-
- 1000 Shots
- Posts: 1650
- Joined: 03 May 2013 10:14
- Location: LaGrange Georgia
- Has thanked: 7 times
- Been thanked: 340 times
Re: Extractor Failure 410
did you look at Numrich gun parts? they show it in stock http://www.gunpartscorp.com/Products/406420C.htm
Don Huff
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
- pricedo
- 2000 Shots
- Posts: 2509
- Joined: 31 Jan 2012 10:36
- Location: Dual Citizen (United States & Canada)
- Has thanked: 56 times
- Been thanked: 234 times
Re: Extractor Failure 410
It would be nice if Rossi owners had access to custom parts like those made by Wild West Guns, Grizzly Guns & a few others like Marlin owners do.
I literally transformed my two Marlin Guide Guns into new guns with after-market custom parts.
I literally transformed my two Marlin Guide Guns into new guns with after-market custom parts.
LIFE MEMBER - NRA & GOA
-
- Posts: 91
- Joined: 15 Oct 2013 16:50
- Location: Green Bay WI
- Has thanked: 16 times
- Been thanked: 10 times
Re: Extractor Failure 410
thanks donhuff....just ordered one....can't wait till it get's here. i hate it when my equipment is down
-
- Posts: 91
- Joined: 15 Oct 2013 16:50
- Location: Green Bay WI
- Has thanked: 16 times
- Been thanked: 10 times
Re: Extractor Failure 410
hey pricedo.....that would be slick!!!!!!! us rossi guys learn how to tear a lever apart for sure......
i am just so thankful for this site.....all you guys have helped me a ton. we can fix anything
i am just so thankful for this site.....all you guys have helped me a ton. we can fix anything
-
- 1000 Shots
- Posts: 1650
- Joined: 03 May 2013 10:14
- Location: LaGrange Georgia
- Has thanked: 7 times
- Been thanked: 340 times
Re: Extractor Failure 410
Your welcome bueller66,
And BTW, if you want a slightly softer trigger pull, the Marlin hammer spring is a direct swap and is a little less strong compared to the Rossi spring. Oops. Should of told you that BEFORE you ordered shouldn't I.
And BTW, if you want a slightly softer trigger pull, the Marlin hammer spring is a direct swap and is a little less strong compared to the Rossi spring. Oops. Should of told you that BEFORE you ordered shouldn't I.
Don Huff
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
- BeerHunter
- Posts: 33
- Joined: 21 Mar 2013 09:11
- Location: MD
- Has thanked: 7 times
- Been thanked: 3 times
Re: Extractor Failure 410
I know it's a different part but for what it's worth, you can see my saga from a couple of months ago trying to get Rossi to give me a replacement ejector for my RG4570S. No dice was the answer because of Braztech's stupid parts lists ejectors, extractors, screws, springs and probably EVERY other owner-replaceable part as "Restricted" items that are only replaceable by them. The only way to get a new one from them was to send the firearm back; a 4-6 week affair and would also subject my beautiful RG4570S to the risk that one of their orangutans that work in the shop got a hold of it (lots of reports of pretty shoddy work coming back). Of course, it's beyond absurd that a part any owner would routinely remove for cleaning would be considered restricted and require returning the firearm back to the factory!
Based on others suggestions, I ordered a Wild West Guns stainless steel ejector for a Marlin 336 and it works flawlessly! It had the added benefit of taming the e that my brass no longer leaves the port at Warp 9.
I love my RG4570S but I'm done with purchasing Braztech as long as they won't sell owner-replaceable parts to the owner. I told the factory rep that when I talked to them on the phone and also that I would warn everyone I know away from Braztech as long as that policy was in place.
Based on others suggestions, I ordered a Wild West Guns stainless steel ejector for a Marlin 336 and it works flawlessly! It had the added benefit of taming the e that my brass no longer leaves the port at Warp 9.
I love my RG4570S but I'm done with purchasing Braztech as long as they won't sell owner-replaceable parts to the owner. I told the factory rep that when I talked to them on the phone and also that I would warn everyone I know away from Braztech as long as that policy was in place.
NRA-RSO, SAF, GOA, MSI, MSRPA, SLSC
FFL 03, MD Designated Regulated Firearms Collector
Love My RG4570S but until Braztech revises their "restricted" parts list, I'll not buy another or recommend the brand to anyone else.
FFL 03, MD Designated Regulated Firearms Collector
Love My RG4570S but until Braztech revises their "restricted" parts list, I'll not buy another or recommend the brand to anyone else.
-
- Posts: 91
- Joined: 15 Oct 2013 16:50
- Location: Green Bay WI
- Has thanked: 16 times
- Been thanked: 10 times
Re: Extractor Failure 410
yeah. I told the CS rep I didn't want to ship mine in either....I will just fix it myself. He said well it is under warranty. I said well....I will fix it myself. Still waiting on my extractor to get here from Numrich....some bad weather going on.