Where can I get a replacement barrel band screw?
Mine was/is all buggered up like this one: http://www.rossi-rifleman.com/viewtopic.php?f=44&t=469
The threads were destroyed at the factory and I messed up the slot trying to get it out.
Where can I get a replacement barrel band screw?
- pricedo
- 2000 Shots
- Posts: 2509
- Joined: 31 Jan 2012 10:36
- Location: Dual Citizen (United States & Canada)
- Has thanked: 56 times
- Been thanked: 234 times
Re: Where can I get a replacement barrel band screw?
If it's as standard screw then RD will know which type & size it is.dmk wrote:Where can I get a replacement barrel band screw?
Mine was/is all buggered up like this one: http://www.rossi-rifleman.com/viewtopic.php?f=44&t=469
The threads were destroyed at the factory and I messed up the slot trying to get it out.
I think he has relieved the forearms on each of his 92s.
You need a serial number from an identical Braztech gun to order the part from Rossi if your gun is a pre-Taurus model.
In any event you'll need to check the schematic on the Rossi website for a part number on the screw.
My 92s have pushed hundreds of rounds down range & are dead-on accurate to 50 yards and no wood has cracked or split so I'm in no hurry to mess with the forearms.
I'll order a walnut butt stock & forearm from Precision and then do the forearm on a gun then repeat the process until they're all done.
Might take 2 or 3 years but I'll eventually get them done.
I'm not going to spend hours refitting jungle wood.......if I do it it'll be with the real deal walnut.
LIFE MEMBER - NRA & GOA
-
- Posts: 49
- Joined: 16 Aug 2012 08:55
- Location: north carolina
- Has thanked: 41 times
- Been thanked: 2 times
Re: Where can I get a replacement barrel band screw?
I spoke with Rossi customer service a few months ago and ordered a new model barrel band and screw from them. Because my gun was a Interarms version they would not garuntee the fit but it fit just fine. I think from the the time I ordered it until I recieved them was less than 9 days. The screw was about $2.60 plus shipping and handling.
- scottz
- Posts: 99
- Joined: 15 Jan 2013 21:53
- Location: Littleton, CO
- Has thanked: 15 times
- Been thanked: 10 times
Re: Where can I get a replacement barrel band screw?
I'm pretty sure being up front about which gun you have, they will still let you order parts, they still want your serial number. They let me place the order for the Taurus sight that way.
Re: Where can I get a replacement barrel band screw?
Thanks guys. I'll give Rossi a call.
I may order a new band as well if it isn't too expensive.
I may order a new band as well if it isn't too expensive.