Hi all, New member here from Ireland. I am currently waiting on my Braztech 92 .38/.357
Hopefully not too long until I start picking everyones brain
Rifle currently has buckhorn sight but I am planning to put a scope on it. Already have the Skinner Sights rail and Vortex scout scope, just need to order some forward reach rings, was thinking 1 inch.
All the best.
Hi New Member
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: Hi New Member
Welcome,
As to the rings, the diameter of course has to match the scope diameter so I assume you are talking cantilever offset forward to clear the bolt for ejection.
I haven't set one up so hopefully somebody will chime in with some advice.
As to the rings, the diameter of course has to match the scope diameter so I assume you are talking cantilever offset forward to clear the bolt for ejection.
I haven't set one up so hopefully somebody will chime in with some advice.
-
- 250 Shots
- Posts: 468
- Joined: 07 Apr 2021 13:08
- Location: Florida Swampland
- Has thanked: 1 time
- Been thanked: 97 times
Re: Hi New Member
Thinkin' you will find rings/scope an un nectcessary accoutrement. 92's ain't much more than a 5 or 6 hun'red foot shooter
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: Hi New Member
Highly recommend the pre purchase inspection checklist:
http://www.rossi-rifleman.com/viewtopic.php?f=9&t=708
and check out the other 92 Forum sticky list threads that seem applicable:
https://rossi-rifleman.com/viewtopic.php?f=9&t=2166
Some things may be a bit out of date compared to current production but since things have been getting better it doesn't check to make sure nobody has backslid.
http://www.rossi-rifleman.com/viewtopic.php?f=9&t=708
and check out the other 92 Forum sticky list threads that seem applicable:
https://rossi-rifleman.com/viewtopic.php?f=9&t=2166
Some things may be a bit out of date compared to current production but since things have been getting better it doesn't check to make sure nobody has backslid.
- Gunny268
- 250 Shots
- Posts: 303
- Joined: 02 Apr 2020 20:23
- Location: Rural AR
- Has thanked: 103 times
- Been thanked: 116 times
Re: Hi New Member
Welcome to the forum. You'll find a lot of knowledgeable and experienced people here. And some with a "unique" sense of humor.