Why are 9mm and 38.37 twist ratios different?

Share your experience in caring for your favorite Rossi with other members or ask the question that you cannot find the answer to!
Post Reply
dalek
Posts: 146
Joined: 22 Nov 2015 05:52
Location: In the mudness
Has thanked: 1 time
Been thanked: 32 times

Why are 9mm and 38.37 twist ratios different?

Post by dalek »

I have seen the same bullets listed to both calibers, or being not very far off (356 vs 357/358) from each other in diameter. However, 1:10 seems to be the standard twist ratio for 9x19 rounds while for 357/38 special the ratio ranges between 1:20. Rossi M92 being in the later group. I have been told in kitty school that bullet weight and length determines twist ratio for a given diameter. Am I missing something?
Daryll
Posts: 28
Joined: 27 Mar 2019 18:25
Location: Cambridgeshire UK
Been thanked: 6 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by Daryll »

I think you've answered your own question there... bullet weight...

9mm is normally 115 or 124 gns, and quite a short bullet.... .38/.357 is normally 158gn and above...
Ohio3Wheels
1000 Shots
1000 Shots
Posts: 1599
Joined: 31 Jul 2014 15:18
Location: Dayton Oh
Has thanked: 227 times
Been thanked: 328 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by Ohio3Wheels »

Yep, bullet weight as reflected in the length. And it's all black magic anyway :D

Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time Image
Nashville Stage
Posts: 175
Joined: 08 Feb 2018 15:20
Location: Nashville, TN
Has thanked: 8 times
Been thanked: 96 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by Nashville Stage »

That's a great question, and I'm not really sure of the answer. The calculations for spin-stabilizing a bullet seem to include equal parts art, science, and specific application.

For example, the M16 was initially designed with a twist rate of 1:14", which was *just* fast enough to keep the bullet stable in flight through air, but allowed it to tumble as soon as it struck an enemy soldier.

However, the twist was increased slightly to 1:12" soon after. When used in very cold weather conditions, the bullets had a lower velocity and therefore had a slower spin, making the bullet start to tumble sooner and lose accuracy.

When the standard bullet changed from M192 to the much longer & less dense M855, the twist rate increased again to 1:7"

I'm amazed at how bullets remain intact from the massive forces that are placed on them, and not just acceleration, either. If you run the calculations, a .223 bullet that's fired from a rifle at 3,000 feet/second through a 1:7" twist barrel is rotating at over 300,000 RPM!
dalek
Posts: 146
Joined: 22 Nov 2015 05:52
Location: In the mudness
Has thanked: 1 time
Been thanked: 32 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by dalek »

Daryll wrote:I think you've answered your own question there... bullet weight...

9mm is normally 115 or 124 gns, and quite a short bullet.... .38/.357 is normally 158gn and above...
But the so-called defense rounds, such as Remington HTP .357 Magnum 110 Grain SJHP and Remington Golden Saber .357 Magnum 125 Grain JHP, have lighter bullets. So we are in the same domain as common 9mm (115) and NATO (124)
Nashville Stage wrote:THowever, the twist was increased slightly to 1:12" soon after. When used in very cold weather conditions, the bullets had a lower velocity and therefore had a slower spin, making the bullet start to tumble sooner and lose accuracy.

When the standard bullet changed from M192 to the much longer & less dense M855, the twist rate increased again to 1:7"
So, if we assume the Rossi M92 was designed to shoot 158gr and heavier bullets, shouldn't its twist ration be higher than the 1:20, being closer to the 1:10 from 9mm?
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 9398
Joined: 23 Jan 2012 07:44
Location: Inez, TX
Has thanked: 1837 times
Been thanked: 2281 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by Ranch Dog »

The current catalog does not list the rate of twist for the 92, but it has always been 1:30.
Michael
Image
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Re: Why are 9mm and 38.37 twist ratios different?

Post by GasGuzzler »

Remington HTP .357 Magnum 110 Grain SJHP and Remington Golden Saber .357 Magnum 125 Grain JHP are an insult to the .357 cartridge. They are also moving faster than a 9X19.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
Post Reply