Adding gas Checks?
- Quinc
- Founding Member
- Posts: 143
- Joined: 11 Jun 2012 21:50
- Location: CA
- Has thanked: 10 times
- Been thanked: 6 times
Adding gas Checks?
I want to buy some cast bullets for my 458 Socom, but I have no idea how to add the gas checks. I have read everything from using a bullet puller die to tapping them on with a small hammer? Anyone have any tips for the cheapest easiest way to add them? I plan on pushing the cast bullets around 1200-1700fps.
"Everyone has a plan tell they get punched in the face." -Mike Tyson
- joec
- Founding Member
- Posts: 508
- Joined: 08 Jun 2012 08:30
- Location: Lexington Kentucky
- Has thanked: 3 times
- Been thanked: 39 times
Re: Adding gas Checks?
Lee Lube and Size Kit does a pretty good job of them for about $16. It presses gas checks on as sizes the bullet if needed.
Joe
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Adding gas Checks?
Also, the bullets must be designed to accept them via a shank on the base of the bullet.
Michael
- Quinc
- Founding Member
- Posts: 143
- Joined: 11 Jun 2012 21:50
- Location: CA
- Has thanked: 10 times
- Been thanked: 6 times
Re: Adding gas Checks?
Damn. Looks like I might have to break down and start casting.. any recommendations for a mold that I can use gas checks with. Around 450gr.
"Everyone has a plan tell they get punched in the face." -Mike Tyson
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Adding gas Checks?
I'm not familiar with the 458 Socom's chamber requirements, that makes a big difference. Give it a google.
Michael
- pricedo
- 2000 Shots
- Posts: 2509
- Joined: 31 Jan 2012 10:36
- Location: Dual Citizen (United States & Canada)
- Has thanked: 56 times
- Been thanked: 234 times
Re: Adding gas Checks?
The 458 Socom shoots a big 45 caliber rifle bullet at relatively low velocities.......not in the same league as stoutly loaded .45-70 & .450 Marlin cartridges.
Sounds like a good short range cartridge for hogs.
Originally designed for military applications.
Might be problematic getting brass for it.
The beauty about the oh 3, thutty thutty, aught 6, oh 8, .45 LC, .44 Mag, .45-70 is that the loaded ammo & reloading supplies & components (dies, brass) are ubiquitous in North America & elsewhere.
If you forget your ammo at home you can go to a mom & pop hardware store in Wayoutyonder, USA or Eskimoville, Canada & have decent odds of finding green/yellow boxed ammo.
Not so with the specialized stuff like the 458 Socom.
Sounds like a good short range cartridge for hogs.
Originally designed for military applications.
Might be problematic getting brass for it.
The beauty about the oh 3, thutty thutty, aught 6, oh 8, .45 LC, .44 Mag, .45-70 is that the loaded ammo & reloading supplies & components (dies, brass) are ubiquitous in North America & elsewhere.
If you forget your ammo at home you can go to a mom & pop hardware store in Wayoutyonder, USA or Eskimoville, Canada & have decent odds of finding green/yellow boxed ammo.
Not so with the specialized stuff like the 458 Socom.
LIFE MEMBER - NRA & GOA
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Adding gas Checks?
I'm thinking more about the throat, leade, step, and freebore cut it the chamber. One of the problems with these proprietary cartridges is that chamber drawings are not readily available as they do not run them through SAAMI.pricedo wrote:The 458 Socom shoots a big 45 caliber rifle bullet at relatively low velocities.......not in the same league as stoutly loaded .45-70 & .450 Marlin cartridges.
Sounds like a good short range cartridge for hogs.
Originally designed for military applications.
Might be problematic getting brass for it.
The beauty about the oh 3, thutty thutty, aught 6, oh 8, .45 LC, .44 Mag, .45-70 is that the loaded ammo & reloading supplies & components (dies, brass) are ubiquitous in North America & elsewhere.
If you forget your ammo at home you can go to a mom & pop hardware store in Wayoutyonder, USA or Eskimoville, Canada & have decent odds of finding green/yellow boxed ammo.
Not so with the specialized stuff like the 458 Socom.
Michael
- Quinc
- Founding Member
- Posts: 143
- Joined: 11 Jun 2012 21:50
- Location: CA
- Has thanked: 10 times
- Been thanked: 6 times
Re: Adding gas Checks?
I bought the brass before I bought the upper! But yeah brass is damn near impossible to find once it's out of stock. I have 100gr - 582gr bullets on the way for it!pricedo wrote:The 458 Socom shoots a big 45 caliber rifle bullet at relatively low velocities.......not in the same league as stoutly loaded .45-70 & .450 Marlin cartridges.
Sounds like a good short range cartridge for hogs.
Originally designed for military applications.
Might be problematic getting brass for it.
The beauty about the oh 3, thutty thutty, aught 6, oh 8, .45 LC, .44 Mag, .45-70 is that the loaded ammo & reloading supplies & components (dies, brass) are ubiquitous in North America & elsewhere.
If you forget your ammo at home you can go to a mom & pop hardware store in Wayoutyonder, USA or Eskimoville, Canada & have decent odds of finding green/yellow boxed ammo.
Not so with the specialized stuff like the 458 Socom.
I read somewhere about someone using a Ranch Dog mold. I will have to find it again. Everything I have read has said to use .459 cast bullets with gas checks.Ranch Dog wrote:I'm not familiar with the 458 Socom's chamber requirements, that makes a big difference.
"Everyone has a plan tell they get punched in the face." -Mike Tyson