Rossi 62 does not have any trigger travel left

Any Rossi not classified in the forums above.
Post Reply
dalek
Posts: 146
Joined: 22 Nov 2015 05:52
Location: In the mudness
Has thanked: 1 time
Been thanked: 32 times

Rossi 62 does not have any trigger travel left

Post by dalek »

Ok, so here is the trigger and hammer from the Rossi 62 pump action thingie:
Rossi_62_09-sm.jpg
You can see the trigger has one notch and the hammer two; I take the two notches are for the "safety" and the "full cock" positions. So far so good.

Now, here is where the trigger rests with hammer in the uncocked/fired position.
Rossi_62_07-sm.jpg
And here it is on the cocked position.
Rossi_62_08-sm.jpg
Not much trigger travel between the two positions. What I noticed is that I really do not have much travel at all when I pull the trigger from the cocked position. I do not mean just no overtravel, but it sometimes feels there is nowhere left for the trigger to go. As a result I can barely release the hammer from the trigger.

Thoughts?
You do not have the required permissions to view the files attached to this post.
Post Reply