Spree...

A bucket for anything that does not fit the above forum categories, both longgun and handgun.

Re: Spree...

Postby mr surveyor » 18 Dec 2021 12:06

I haven't bought a new gun since "the late unpleasantness of 2016", but finally decided I could actually spend a small amount. So, I bought a C,A. Bulldog about a month ago since it's the first .44 spl that fit my "digitally challenged" hand. My luck as usual (2014/2015 being a 1 in 300,000 to have a certain cyst on my colon - and worse yet having a cranial nerve issue in 2016 that made me another member of the 1 in 300,000 requiring brain surgery x2) .... the C.A. had a light strike issue with 4-5 out of the first 20 "factory rounds" put through it, and that was after giving in a brief cleaning to get the factory goo off. I was skeptical of the "factory" rounds I bought from my lgs buddy since they were from a small operator (now defunct?) that my buddy bought several years ago ... first thought was it could have been the primers might not have been seated to bottom. So, before I raised the issue with my ffl bud, I had a little .44 spl brass on hand (even though I've never loaded any 44 spl) and plenty of 44 bullets, powder and primers ..... loaded up a 20 round "test batch" paying close attention to proper seating of the primers. Yep, another 6-8 rounds of light strikes with some taking 3-4 re-strikes. I had a couple that I just gave up on after 5 strikes - shot them both with my R92 with just a single click each. Needless to say, my friend sent it back to Charter a couple of weeks ago and the wait is on.

now, where's the primers :roll:


jd
-----------------------------------------------------------------------------------------
Guns - They aren't really yours until you void the warranty!
User avatar
mr surveyor
1000 Shots
1000 Shots
 
Posts: 1562
Joined: 16 Mar 2013
Has thanked: 446 times
Been thanked: 282 times
My Rossi Choice: M92
Location: NE Texas

Re: Spree...

Postby Archer » 18 Dec 2021 18:37

I like the idea of a .44 Special but I don't like the lack of easy to find inexpensive .44 Sp ammunition.
I would much rather have a .44 Magnum simply because of the ammo availability but it simply does not make sense for a snubby or light/small last ditch weapon.

I sort of regret not buying a Ruger single action .44 Sp I saw a few years ago. I'd have bought it in the magnum chambering but the Special was a deal breaker.
Archer
2000 Shots
2000 Shots
 
Posts: 3781
Joined: 04 Feb 2014
Has thanked: 130 times
Been thanked: 578 times
My Rossi Choice: M92
Location: SoCal Loco

Re: Spree...

Postby Gunny268 » 19 Dec 2021 02:05

I kinda go along with Archer on the .44 Spl. I have several friends that own Ruger Blackhawks and Smith & Wesson 44s. I found them to be much more easy shooting than the 44 mag and my 45 Colts (with tier 2 loadings). But one of the fellas loads his 44 mag down to 44 Spl pressures. He says the magnum chambering fills two roles. Easier loads for range time and full house loads for deer and hogs. I do the same with my 45 Colts. That has been the underlying reason I've passed, despite several really sweet temptations, on opportunities to buy a 44 Spl. And I'm no Elmer Keith. As far as me getting a Ruger Blackhawk Flattop (Bisley) in 44 Spl? I guess I can't say "Never."
User avatar
Gunny268
 
Posts: 126
Joined: 02 Apr 2020
Has thanked: 68 times
Been thanked: 48 times
My Rossi Choice: M92
Location: Rural AR

Re: Spree...

Postby GasGuzzler » 19 Dec 2021 06:04

I don't buy factory ammo any more (unless I add a cartridge) and all factory ammo is expensive. Steel 7.62X39 is $0.40 per round and no one has .44 anything in stock much so...
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
GasGuzzler
Moderator & Supporter
Moderator & Supporter
 
Posts: 2542
Joined: 02 Nov 2015
Has thanked: 274 times
Been thanked: 397 times
My Rossi Choice: M92
Location: Cooke County, TX

Re: Spree...

Postby Archer » 19 Dec 2021 15:18

I do load my own, and have half a lifetime of brass from when I've not had the time to load.

Whenever I pick up a new caliber, I try and get a supply of ammo.
That's a thousand to five thou rounds for a handgun caliber, especially a self defense handgun. Maybe a little less for the magnums or hunting calibers. Same deal for a rifle except there I'll start with 500-1000+ rounds for a semi auto caliber and 100-200 rounds for a hunting caliber or manual action. I generally try to go 200-500 eventually on the manual calibers and get a hundred or two lead free bullets to load in each caliber because of CA hunting regulations.

Just about every president from Clinton on, especially the democrat party presidents have had an ammo shortage and the last two dems have turned into full on droughts of both ammo and reloading components and equipment.

Talking about the current cost of 7.62x39, I haven't even seen any legit bullets to load in that caliber for more than an hour or two before the supplier is sold out. That's one caliber where I'm a little slim on components unless I use the half a case of .300 Blackout bullets to load it.
Archer
2000 Shots
2000 Shots
 
Posts: 3781
Joined: 04 Feb 2014
Has thanked: 130 times
Been thanked: 578 times
My Rossi Choice: M92
Location: SoCal Loco

Re: Spree...

Postby GasGuzzler » 20 Dec 2021 07:54

I have two .30 cal molds. One is for 7.62X39 and 300BO and the other is for .30-30 WIN.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
GasGuzzler
Moderator & Supporter
Moderator & Supporter
 
Posts: 2542
Joined: 02 Nov 2015
Has thanked: 274 times
Been thanked: 397 times
My Rossi Choice: M92
Location: Cooke County, TX

Previous

Return to All Other Firearms

Who is online

Users browsing this forum: No registered users and 3 guests