Feeling the Pull to Cast and Load for .38/.357 Mag..

Take total control of your projectiles by casting your own!
Lostcoast
Posts: 86
Joined: 25 Nov 2012 17:51
Location: Southern Oregon
Has thanked: 15 times
Been thanked: 15 times

Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Lostcoast »

I've been reading a lot of posts lately about casting bullets and it appeals to me on a lot of levels: it seems practical and money saving, it allows greater independence, it results in highly effective projectiles, and it looks like a lot of fun.

I'm near to buying a Rossi 92 in .38/.357 mag. The use of the rifle will be for "precision plinking" (50 yards and beyond to as far as I can accurately shoot), ranch defense, and hunting deer and black bear. I have a pile of Magtech, Federal American Eagle and LEVERevolution .357 mag ammo but I want to start rolling my own.

So this total cast bullet newbie asks: What all do I need? What bullets and their molds do you recommend for the purposes mentioned above? Which economical but effective casting pot should I get? What lubes etc do I need? Is there a book or DVD that you recommend for a beginner in the art of casting?

Thanks very much.
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by GasGuzzler »

Start with a bullet design that only requires tumble lube. There are several options on what to tumble them in. A cheap and simple .357 mold to start with is the Lee TL358-158-2R that should be easy to chamber in the rifle and likely wouldn't require post sizing. Combine that mold with a Lee bottom pour pot model 90009. Buy some known alloy from the internet (other members should have links as I get mine "free" from wheel weights) to start and later you can experiment with smelting your own lead, making bullet lube, post sizing, and adding gas checks to bullets from a different mold.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
Lostcoast
Posts: 86
Joined: 25 Nov 2012 17:51
Location: Southern Oregon
Has thanked: 15 times
Been thanked: 15 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Lostcoast »

GasGuzzler wrote:Start with a bullet design that only requires tumble lube. There are several options on what to tumble them in. A cheap and simple .357 mold to start with is the Lee TL358-158-2R that should be easy to chamber in the rifle and likely wouldn't require post sizing. Combine that mold with a Lee bottom pour pot model 90009. Buy some known alloy from the internet (other members should have links as I get mine "free" from wheel weights) to start and later you can experiment with smelting your own lead, making bullet lube, post sizing, and adding gas checks to bullets from a different mold.
Thank you, GasGuzzler - that sounds like very sage advice. I appreciate it!
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 9398
Joined: 23 Jan 2012 07:44
Location: Inez, TX
Has thanked: 1837 times
Been thanked: 2281 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Ranch Dog »

GG offers good advice! I would suggest a "TL" mold as well, that is about all I shoot, but given the available selection from Lee and your mention of hunting, I would go with the 358-158-RF. The difference between the design, other than the lube grooves, is the tangent ogive nose vs. the bore rider 2R. The "RF" will provide a much better throat to bullet fit plus the large meplat nose will provide the killing authority that is needed for hunting with cast. The bullet can still be tumble lubed, and I would not worry about whether or not the lube groove fills with lube or not. I would shoot it as cast and not worry about sizing. Keeping it simple, I would buy the 2-cavity mold vs. a six.
Michael
Image
Lostcoast
Posts: 86
Joined: 25 Nov 2012 17:51
Location: Southern Oregon
Has thanked: 15 times
Been thanked: 15 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Lostcoast »

Thank you, RD. Is it when one goes to heavier bullets that resizing etc becomes necessary?
Ohio3Wheels
1000 Shots
1000 Shots
Posts: 1599
Joined: 31 Jul 2014 15:18
Location: Dayton Oh
Has thanked: 227 times
Been thanked: 328 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Ohio3Wheels »

Resizing gets to be necessary when the as cast bullets are too big for your bore and without experience with your gun and a variety of bullet sizes it's a hard thing to know. Best idea and probably most reliable is to "slug" your bore and shoot for a cast size one or two thousands over groove diameter.

Casting can be relaxing or work or frustrating or all three in one session. I started in '69 with a ten pound Lyman pot on a Coleman fuel camp stove and one 9mm mold. Fifty years later I still cast from a pot with a dipper and there are a few more molds in the box. Some of the guns I cast for for fun and at least one if I don't cast I don't shoot. Nice thing about it if one mold gets cranky I can put it down and pick up another. Sometimes you just shut the pot of and do something else.

It's all part of the adventure start slow and enjoy sending you own bullets down range from your own hand made loads.

Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time Image
User avatar
Missionary
Founding Member
Founding Member
Posts: 588
Joined: 21 Mar 2012 15:47
Location: Peru
Has thanked: 9 times
Been thanked: 145 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Missionary »

Greetings
Caliber .357 mag is where I started when I got out of the "Green Machine" many years ago. Back then there was no tumble lube. Started out by smearing home made "goop" while watching whatever program. Shots lots of those.
But today we do a bunch of tumble lube. Even tumble many that are not tumble type slugs... and they shoot just fine.
Way down south in Arequipa, Peru till June 2020.
rondog
250 Shots
250 Shots
Posts: 452
Joined: 19 Oct 2015 01:32
Location: Colorado
Has thanked: 181 times
Been thanked: 142 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by rondog »

I agree with GasGuzzler, except for the bottom pour furnace/pot. Yes, they can work fine, but they can also leak and drive you nuts. I use a Lyman pot with a dipper, and have no reason to change

I do recommend utilizing a big steel cookie/baking sheet under your furnace to catch drips/spills, and set hot items on.

And a MUST, in my opinion, is a Lyman lead thermometer. A very worthy investment!
Lostcoast
Posts: 86
Joined: 25 Nov 2012 17:51
Location: Southern Oregon
Has thanked: 15 times
Been thanked: 15 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by Lostcoast »

Thank you gentlemen, I am appreciating your knowledge and input.
ddj
Posts: 75
Joined: 06 Apr 2014 14:21
Location: MN
Has thanked: 49 times
Been thanked: 23 times

Re: Feeling the Pull to Cast and Load for .38/.357 Mag..

Post by ddj »

Caution! Once you start casting you'll be hooked!
Post Reply