New member
-
- Posts: 120
- Joined: 28 May 2021 15:28
- Location: PA
- Has thanked: 2 times
- Been thanked: 9 times
New member
Hello from Pennsylvania. Just got myself a Rossi 38/357.. Hope to shoot it tomorrow if it warms up a little. Any reloading tips for the 357 or the 38,s.. thanks
- GasGuzzler
- Moderator
- Posts: 2756
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: New member
Welcome. There are a lot of loading tips here but my advice is to also join Lee-Loader forum here ---> CLICK HERE
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: New member
Welcome
#1) If you can't bake a cake from a scratch recipe don't reload.
#2) Verify your gun is functional, safe, feeds and shoots factory ammo so any issues you have with your reloads are identifiable as issues with the ammo not the firearm.
#3) Manual
#4) Accurate, reliable, repeatable powder scale.
#1) If you can't bake a cake from a scratch recipe don't reload.
#2) Verify your gun is functional, safe, feeds and shoots factory ammo so any issues you have with your reloads are identifiable as issues with the ammo not the firearm.
#3) Manual
#4) Accurate, reliable, repeatable powder scale.
-
- 250 Shots
- Posts: 468
- Joined: 07 Apr 2021 13:08
- Location: Florida Swampland
- Has thanked: 1 time
- Been thanked: 97 times
Re: New member
Tubular magazine = flat tip bullets so they don't go off tip-to-primer under recoil.
Don't know your intended use, but if you want some potent loads, be sure to absolutely mark them, prevent them from being used in a handgun. My personal method is crude but effective --> cast lead can be shot from anything, jacketed is for rifle only.
You can go nuts, slug the bore, use cast bullets that are "just-so" for that particular rifle, or have fun reloading and shootin'. Your choice
Some rifles can be finicky with length and bullet shape, so you may have to experiment a bit, but that is part of the fun. Keep notes!
What "feeds great" with the stock ejector spring may give some issues with a lighter ejector spring. When using a lighter spring, you'll need to decide if you want a "race gun" or one that is just a lot smoother but still really reliable. Reason being the amount of spring compression as the round clears the feed rails in the receiver, and at what point of bolt travel the round lifts out of those rails. Make sure your lighter spring can eject un-fired rounds, so you can unload ok, if need be.
Don't know your intended use, but if you want some potent loads, be sure to absolutely mark them, prevent them from being used in a handgun. My personal method is crude but effective --> cast lead can be shot from anything, jacketed is for rifle only.
You can go nuts, slug the bore, use cast bullets that are "just-so" for that particular rifle, or have fun reloading and shootin'. Your choice
Some rifles can be finicky with length and bullet shape, so you may have to experiment a bit, but that is part of the fun. Keep notes!
What "feeds great" with the stock ejector spring may give some issues with a lighter ejector spring. When using a lighter spring, you'll need to decide if you want a "race gun" or one that is just a lot smoother but still really reliable. Reason being the amount of spring compression as the round clears the feed rails in the receiver, and at what point of bolt travel the round lifts out of those rails. Make sure your lighter spring can eject un-fired rounds, so you can unload ok, if need be.