http://www.marlinfirearms.com/Firearms/ ... 895SBL.asp
18.5 inch barrel they claim.
18.25 by my tape measure.
Stainless, 6 shot tube mag, black and grey laminate, ghost ring sight with full rail over the receiver and the aft section of the barrel.
( http://www.midwayusa.com/product/999284 ... inum-black )
Rubber baby bumper buttpad. Slightly oversized lever, pistol grip stock with black heel cap and sling swivels installed.
Filled out the papers on a Marlin .45-70 SBR
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Filled out the papers on a Marlin .45-70 SBR
You do not have the required permissions to view the files attached to this post.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Filled out the papers on a Marlin .45-70 SBR
I have three XS Marlin scouts, very nice rifles!
Front to back is 1894P (44 Mag), 336D (35 Rem), & 444P.
Front to back is 1894P (44 Mag), 336D (35 Rem), & 444P.
Michael
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: Filled out the papers on a Marlin .45-70 SBR
RD,
Sweet setup!
Looked like 18.25" from the muzzle to the breach end of the barrel to me.
Wasn't marked on the box, so I wrote the paper/electronic records to the state we have to do here as 18".
Marlin's website says 18.5". I figure someone got lazy (like me) and rounded the opposite way from what I did on their written specs.
I'd probably have been just as happy with a 20" or 22" barrel but this one don't seem to handle bad at all.
This is my second Marlin, after the .444 and might just make me see if I can rail the first one.
I know XS makes the scout mount that's supposed to fit the .444, not 100% on the full receiver to scout rail however. I know they list it for the 1895 and the 336 but neither calls out the .444 specifically while the scout does.
Sweet setup!
Looked like 18.25" from the muzzle to the breach end of the barrel to me.
Wasn't marked on the box, so I wrote the paper/electronic records to the state we have to do here as 18".
Marlin's website says 18.5". I figure someone got lazy (like me) and rounded the opposite way from what I did on their written specs.
I'd probably have been just as happy with a 20" or 22" barrel but this one don't seem to handle bad at all.
This is my second Marlin, after the .444 and might just make me see if I can rail the first one.
I know XS makes the scout mount that's supposed to fit the .444, not 100% on the full receiver to scout rail however. I know they list it for the 1895 and the 336 but neither calls out the .444 specifically while the scout does.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times