That is a good idea. Also a person could take a lube stick tube,cap one end place a small diameter dowel in the center of it and pour in the melted mix wait till it stiffens up good and pull the dowel out cap the top and store as you choose.se3388 wrote:Ohio3Wheels
I cut mine sort of like wquiles did and the sticks slide down in my Lube-a-Matic II fairly easy and I have lubed & sized several thousand bullets with it so far.
Steve..........
Making Ben's Red bullet lube ...
-
- Posts: 15
- Joined: 16 Aug 2015 18:40
- Location: Dry Ridge, Ky
Re: Making Ben's Red bullet lube ...
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Making Ben's Red bullet lube ...
Over at cast boolits I've seen where guys just pour the hot lube into the lubrisizers or there are a couple of articles on making a mold to form sticks for the Lyman and RCBS machines. A bit of wood some dowels some pvc pieces and mold lube.
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
-
- Posts: 15
- Joined: 16 Aug 2015 18:40
- Location: Dry Ridge, Ky
Re: Making Ben's Red bullet lube ...
I've saved all the tubes that some of my lube sticks have come in and I plan to give them a try and use a pencil.Ohio3Wheels wrote:Over at cast boolits I've seen where guys just pour the hot lube into the lubrisizers or there are a couple of articles on making a mold to form sticks for the Lyman and RCBS machines. A bit of wood some dowels some pvc pieces and mold lube.
Make smoke,
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Making Ben's Red bullet lube ...
Should work. Unfortunately I never save any of those packages
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
-
- Posts: 15
- Joined: 16 Aug 2015 18:40
- Location: Dry Ridge, Ky
Re: Making Ben's Red bullet lube ...
I figure waste not want not. There are many ways to do the same thing.
-
- Posts: 15
- Joined: 16 Aug 2015 18:40
- Location: Dry Ridge, Ky