Can anyone steer me in the direction of an available M62 firing pin and accompanying spring?
Thanks for your time,
oldteche
M62 firing pin and spring
Forum rules
- This site is not associated with RossiUSA/Braztech nor is RossiUSA/Braztech responsible for this site's content nor do they or any of their representatives participate on this forum!
- Rants will be moderated.
- To participate in this forum, you must have more than five (5) posts.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
Re: M62 firing pin and spring
I cannot vouch that they are exactly the same but best I have found so far. The rossi/taurus 62 is supposed to be a winchester copy so hopefully it will work.
http://www.homesteadparts.com/shopcart/ ... er_62A.htm
http://www.homesteadparts.com/shopcart/ ... er_62A.htm
- 7.62 Precision
- Posts: 174
- Joined: 04 Sep 2013 23:44
- Location: Alaska
- Has thanked: 13 times
- Been thanked: 84 times
Re: M62 firing pin and spring
They are not the same - I tried. I'm pretty sure I ordered a firing pin from Taurus after trying to adapt a Winchester pin, but maybe I got a Winchester one to work - it was a long time ago.
It was for a customer.
It was for a customer.
-
- Posts: 2
- Joined: 03 Jul 2014 19:08
- Location: WA
Re: M62 firing pin and spring
Thank you for the information, I do appreciate your input.
I use to have a Rossi M62 many years ago, and as a fool, I sold it. So several years back I purchased a Taurus M62, since it was what I could find. I love the rifle, but hate what they did to it with the addition of the safety on top of the bolt. I find it very disfiguring and to me destroys it's beauty.
Just recently I ran accros a Rossi M62 bare bolt on ebay for cheap, so I bought it. I was hoping and assumed that the Rossi bolt was a match for the Taurus. My plan was to remove all of the pins, firing pin, spring, extractor, and firing pin stop from the Taurus bolt and use them for the Rossi (leaving the Taurus safety with the Taurus bolt.
I removed all the components, but could not get the safety's pin out, that also holds the firing pin. Taurus peened it in. That was the reason for my request. After another more concentrated effort, I did remove the pin, the safety, and the firing pin.
As a result, I now have a classic looking Taurus M62 with a Rossi bolt.
Sorry for my erroneous request, but at the time the firing pin was needed.
Thanks again for your help
I use to have a Rossi M62 many years ago, and as a fool, I sold it. So several years back I purchased a Taurus M62, since it was what I could find. I love the rifle, but hate what they did to it with the addition of the safety on top of the bolt. I find it very disfiguring and to me destroys it's beauty.
Just recently I ran accros a Rossi M62 bare bolt on ebay for cheap, so I bought it. I was hoping and assumed that the Rossi bolt was a match for the Taurus. My plan was to remove all of the pins, firing pin, spring, extractor, and firing pin stop from the Taurus bolt and use them for the Rossi (leaving the Taurus safety with the Taurus bolt.
I removed all the components, but could not get the safety's pin out, that also holds the firing pin. Taurus peened it in. That was the reason for my request. After another more concentrated effort, I did remove the pin, the safety, and the firing pin.
As a result, I now have a classic looking Taurus M62 with a Rossi bolt.
Sorry for my erroneous request, but at the time the firing pin was needed.
Thanks again for your help
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times