Want to make one but the pics are gone on this old thread:
https://www.rossi-rifleman.com/viewtopi ... 369#p20731
If there's any way to view the 2 pics I'd appreciate it. The OP (LRP) last visited in 2016 or I would PM.
I've done a few mods already, haven't even shot my 92 44! Currently struggling with the barrel band screw,
refuses to budge. Soaking now. Might have to drill it out (already have a new one). Want to remove the mag tube, think smoothing it might help with loading. Think I feel an edge in there when pushing in a cartridge.
Filed the loading gate spring, that helped, also knocked down the sharp edges.
I know, buy a RFN mould, but not 'til I try some things first!
Magazine quick unloader - pics?
- a.squibload
- Posts: 21
- Joined: 04 Jun 2022 02:42
- Location: CO
- Has thanked: 10 times
- Been thanked: 2 times
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
-
- Posts: 175
- Joined: 08 Feb 2018 15:20
- Location: Nashville, TN
- Has thanked: 8 times
- Been thanked: 96 times
Re: Magazine quick unloader - pics?
Go ahead and try sending them a PM anyway. If they set up their forum account right, PMs and notifications will get forwarded to their email address by the forum software.
- a.squibload
- Posts: 21
- Joined: 04 Jun 2022 02:42
- Location: CO
- Has thanked: 10 times
- Been thanked: 2 times
Re: Magazine quick unloader - pics?
Thanks, he's still in the member list so I sent a PM.
I have an idea it's pretty basic but might as well see what was already successful.
Cutting the slots would be the scary part, assuming there are slots to cut!
I have an idea it's pretty basic but might as well see what was already successful.
Cutting the slots would be the scary part, assuming there are slots to cut!