"First shoot a success!" A look back and range report

The Rossi Model R92, a lightweight carbine for Cowboy Action, hunting, or plinking! Includes Rossi manufactured Interarms, Navy Arms, and Puma trade names.
User avatar
GRV01
250 Shots
250 Shots
Posts: 322
Joined: 14 Jan 2017 15:59
Location: Miami FL
Has thanked: 10 times
Been thanked: 47 times

"First shoot a success!" A look back and range report

Post by GRV01 »

Was really worried about taking my new 92 357 for its first shoot this weekend but out of the box it fed fired and ejected like a champ! Very accurate (albeit at 10yds, 25yds next week) and light recoil even with 357s was absolutely a pleasure. Was pleasantly surprised by the stock semi buckhorn sights which i adjusted to well.

I did have slight difficulty loading rounds into the magtube but i feel that was operator error more than anything though time will tell

Cant wait to go back!
Last edited by GRV01 on 07 Jul 2017 04:32, edited 1 time in total.
No thin chicks
Currently reloading: 38 SPL, 357 MAG
Rossi's Owned: M92 .357 20"(Owned by Wifey: M92 .357 16")
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: First shoot a success!

Post by akuser47 »

Always good to hear
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
golfish
500 Shots
500 Shots
Posts: 795
Joined: 23 Oct 2012 17:25
Location: Alta Loma, Ca
Has thanked: 26 times
Been thanked: 166 times

Re: First shoot a success!

Post by golfish »

Congrats on the new gun. There are some mods you can do that will make loading a little easier. Search YouTube ...

I think the 357 R92 is the funnest gun for me. I have 3 of them and they all have had little problems. It's seems that the longer I have them the better they get.

Did you try 38sp rounds?
User avatar
zippy
250 Shots
250 Shots
Posts: 416
Joined: 05 Mar 2015 20:34
Location: Upstate South Carolina
Has thanked: 103 times
Been thanked: 103 times

Re: First shoot a success!

Post by zippy »

GRV01 wrote:I did have slight difficulty loading rounds into the magtube ...
Had the same difficulty on mine, until I narrowed the gate spring to relieve some of the tension. Doing that modification made It stop chewing my finger tips as an added benefit.
User avatar
GRV01
250 Shots
250 Shots
Posts: 322
Joined: 14 Jan 2017 15:59
Location: Miami FL
Has thanked: 10 times
Been thanked: 47 times

Re: First shoot a success!

Post by GRV01 »

Yeah that loadgate ia def stiff out of the box. Adjusting the tension ks something ill jave to look into. I k ow atleast a few times i was unknowingly trying to load the nose of one round into the base of tje other at an angle

And yup fired 38s aswell which turned it into a plinker. Best of all wifey enjoyed the heck out of it too. Im not opposed to her gwtting her own *grin*
No thin chicks
Currently reloading: 38 SPL, 357 MAG
Rossi's Owned: M92 .357 20"(Owned by Wifey: M92 .357 16")
User avatar
GRV01
250 Shots
250 Shots
Posts: 322
Joined: 14 Jan 2017 15:59
Location: Miami FL
Has thanked: 10 times
Been thanked: 47 times

Re: First shoot a success!

Post by GRV01 »

wow, looking at this thread six and a half months later was interesting

so yesterday was a day of firsts when I took my 20" 357 to the outdoor range for the first time to shoot 100 yards, also for the first time to shoot steel, again, for the first time. It was just me and an old timer at that particular range (this place has like twelve) in the early morning humid heat of Homestead, FL just south of Miami. Speaking of the old man it was an amusing comparison since I had my 1892-style lever action pistol caliber carbine with iron sights and he was shooting a modern whizbang magazine fed, muzzle braked rifle with a scope that looked like it cost as much as my Rossi

I wanted to burn through the last of my first reloads that I had made with the swaged Hornady 158gr LRNs I had bought totaling about 140: 60 with HP38 and 80 with HS6. When I switched to the HS6 I was hitting consistently maybe 2/3s the time but those HP38s while light and accurate at close range were having a hard time meeting steel (less than half!) it seemed and Im not sure why. It cant be because of low velocity causing them to hit low could it? Would make sense though as the faster, and almost certainly flatter shooting, HS6s were making that plate sing. It being my first time shooting that distance I had a tough time keeping the smile off my face. The fact that it was pouring sweat made it easier to conceal

Speaking of which I guess I ate too much salt the night before as I left an unsightly stain on the stock where my cheek rested, any tips on cleaning that?

in any case it was a great shoot and I had a blast. I never thought id say it but my blued Rossi M92 in 357 with the 20" barrel is my favorite possession!
No thin chicks
Currently reloading: 38 SPL, 357 MAG
Rossi's Owned: M92 .357 20"(Owned by Wifey: M92 .357 16")
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 9398
Joined: 23 Jan 2012 07:44
Location: Inez, TX
Has thanked: 1837 times
Been thanked: 2281 times

Re: First shoot a success!

Post by Ranch Dog »

GRV01 wrote:Speaking of which I guess I ate too much salt the night before as I left an unsightly stain on the stock where my cheek rested, any tips on cleaning that?
Hah! Put a real finish on it. I was on a nilgai hunt with my RG4570 and a heavy thunderstorm came overhead. I lasted about 15 minutes and I was hunkered down over my rifle trying to protect it. After it passed and things were drying out, I noticed that the stock on my rifle looked like a calico cat. The stain had run onto my camo pants. The good thing is that the rubberwood is very easy to work with. Time to seal it up.
Michael
Image
User avatar
HarryAlonzo
500 Shots
500 Shots
Posts: 989
Joined: 31 Dec 2015 00:20
Location: Sedona
Has thanked: 248 times
Been thanked: 281 times

Re: "First shoot a success!" A look back and range report

Post by HarryAlonzo »

A good method for cleaning an oil finish is GoJo hand cleaner (non-pumice) and 0000 steel wool. Don't know how it works on Rossi factory finish, but what've you got to lose?
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 9398
Joined: 23 Jan 2012 07:44
Location: Inez, TX
Has thanked: 1837 times
Been thanked: 2281 times

Re: "First shoot a success!" A look back and range report

Post by Ranch Dog »

HarryAlonzo wrote:A good method for cleaning an oil finish is GoJo hand cleaner (non-pumice) and 0000 steel wool. Don't know how it works on Rossi factory finish, but what've you got to lose?
Thanks for the tip. I've started refinishing my Win M94 and have made little progress with the oil finish. I will give the GoJo a try!
Michael
Image
User avatar
zippy
250 Shots
250 Shots
Posts: 416
Joined: 05 Mar 2015 20:34
Location: Upstate South Carolina
Has thanked: 103 times
Been thanked: 103 times

Re: First shoot a success!

Post by zippy »

GRV01 wrote:...in any case it was a great shoot and I had a blast. I never thought id say it but my blued Rossi M92 in 357 with the 20" barrel is my favorite possession!


Funny how that happens. :D

I took my cousin and her husband to the range with an assortment of firearms to shoot. He's an old PA farmboy who has not shot in fifty years. We worked our way through the handguns first and when he got to the .357 Rossi 92, it was kismet. He would not put it down until all the ammo was gone, and even then held it a while longer.

Glad yours is working out.
Post Reply