Cleaning fired Brass
Re: Cleaning fired Brass
How many times do you tumble before changing out your media?
I use fine walnut shells with a little Nu Finish polish thinned with acetone, and usually toss a couple pieces of dryer sheet in to help with the dust...although the usefulness of the dryer sheets is negligible. They definitely turn dark and help a little, but I still get some dust when dumping it into the separator.
I think I've only changed out the media twice, after maybe 20 brass cleaning cycles each time. Maybe I should start changing it out more often.
I use fine walnut shells with a little Nu Finish polish thinned with acetone, and usually toss a couple pieces of dryer sheet in to help with the dust...although the usefulness of the dryer sheets is negligible. They definitely turn dark and help a little, but I still get some dust when dumping it into the separator.
I think I've only changed out the media twice, after maybe 20 brass cleaning cycles each time. Maybe I should start changing it out more often.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Cleaning fired Brass
Good question, I really don't have any set period. I'm actually going to start washing my brass first with Birchwood Casey's Brass Cartridge Case Cleaner and then using my vibrator just to polish the brass. I thought that might add some life to the media by starting cleaner.calan wrote:How many times do you tumble before changing out your media?
Michael
- pricedo
- 2000 Shots
- Posts: 2509
- Joined: 31 Jan 2012 10:36
- Location: Dual Citizen (United States & Canada)
- Has thanked: 56 times
- Been thanked: 234 times
Re: Cleaning fired Brass
Dust generated by tumbling media left till it gets supersaturated with dirt & impurities removed from cartridge casings can be hazardous to your health.
I always ran my cases through a RCBS depriming die (deprimes without sizing) & removed the spent primers before tumbling them and the material from inside the primer pocket is apparently rich in lead compound dust.
I always ran my cases through a RCBS depriming die (deprimes without sizing) & removed the spent primers before tumbling them and the material from inside the primer pocket is apparently rich in lead compound dust.
LIFE MEMBER - NRA & GOA
- 357cyrus
- Posts: 104
- Joined: 07 Jan 2013 03:19
- Location: North Central Ohio 44880
- Has thanked: 12 times
- Been thanked: 14 times
Re: Cleaning fired Brass
If anyone could post a picture of what is too dirty or saturated I'd like to know. I don't think I've reached that point yet. I use dryer sheets in walnut with a little "brasso" polish. I don't notice too much dust, but I separate outside with the wind at my back and try to take a shower right afterwards. I keep telling myself next time I go to the Dr I should get a lead test done to get a baseline to see if I'm picking any up.
*** Peace Through Superior Firepower ***
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
Re: Cleaning fired Brass
There are always percautions to be taken with my vib. medie I always add fab soft. sheets to help catch extra dust and grim. always be carfeful.Wet tun=mblers are a different matter totaly and should be taken as so.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Cleaning fired Brass
My Doctor includes the lead test at my request annually. No additional charge for it, they just need to know you want it. I'm casting a barrel of bullets a year and all this other stuff using standard safety precautions and it always comes up zip.357cyrus wrote:I keep telling myself next time I go to the Dr I should get a lead test done to get a baseline to see if I'm picking any up.
Michael
- mr surveyor
- 1000 Shots
- Posts: 1611
- Joined: 16 Mar 2013 11:20
- Location: NE Texas
- Has thanked: 490 times
- Been thanked: 294 times
Re: Cleaning fired Brass
I'm still using a small ultrasonic cleaner I bought in 1983 for cleaning drafting pens. I buzz them for half an hour in 50/50 mix of plain vinegar and water, give that batch a quick rinse, then dunk them in a coffee can of Birchwood Casey's Brass Cleaner solution. Maybe not polished, but they come out more than clean enough both inside and out. Since the brass is already "clean" before it goes into the Birchwood Casey's solution, I've been able to brighten up thousands of pieces of brass with about 1/2 volume of a small coffee can of mix. I always deprime (universal depriming die) all of my brass before the bath as it helps get a flow through during cleaning as well as a flow through of air for drying.
If I do go to a "solid media" type system though, the steel pins do sound interesting.
If I do go to a "solid media" type system though, the steel pins do sound interesting.
-----------------------------------------------------------------------------------------
Guns - They aren't really yours until you void the warranty!
Guns - They aren't really yours until you void the warranty!
-
- 1000 Shots
- Posts: 1650
- Joined: 03 May 2013 10:14
- Location: LaGrange Georgia
- Has thanked: 7 times
- Been thanked: 340 times
Re: Cleaning fired Brass
Tuco, do you know about getting you walnut hull from the pet store? And putting polish from walmart in it?
Sure is a LOT cheaper that way.
Sure is a LOT cheaper that way.
Don Huff
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
Re: Cleaning fired Brass
I buy my walnut at pet stores and use a polish from franford arsenal and add fabric softner shheets to cut down on dust makes the media last longer and to answer your qeustion I use my media till it starts to darken I then know it is filthy and time to dump it. compare it each time to what you still have clean in the bag easy cheesy.
Re: Cleaning fired Brass
I switched over to the wet tumbler method using SS pins earlier this year & will NEVER go back to the dry vibrating method. The wet method produces brand new looking brass PLUS you don't have to clean the primer pockets separately. Yes I know that some shooters never clean primer pockets but for those that do, the wet method eliminates that tedious & laborious step.