Page 2 of 2

Re: Plinking with my 20" 45 Colt

Posted: 06 Aug 2019 22:23
by Sarge
I am glad I kept is the Rossi 92 in 45 Colt. It was touch & go for a few days because I had a guy offering the basic M&P AR, in trade for it. Then another guy waved a K22 at me, but the gun had been Bubba'ed and that killed it.

Anyhow I dug this old rifle out and promptly fell in love with it again. It had the usual mismatched stock & forend, so I walnut stained them both until they roughly matched and then rubbed in four coats of Tru Oil.

Image

I put a 0.410 tall, 1/16 Marbles brass bead front sight in it and that makes for a much finer sight picture than the OEM brass hubcap did. The way it all worked out, I get a 100 yard zero on the lowest notch and 200 yard zero on the next one. These being with my bulk 45 Colt load that scoots at Lee 255 grain lead Flat Nose 1180 fps from this rifle. Right after taking this photo it put three of them into 5 1/2" at 200 yards.

Re: Plinking with my 20" 45 Colt

Posted: 07 Aug 2019 05:36
by GasGuzzler
I can get an un-fired M&P locally for about $450 but not an R92.

Nice work.

Re: Plinking with my 20" 45 Colt

Posted: 07 Aug 2019 08:20
by Mad Trapper
Hey Sarge,
that wood looks real nice.
Looks like a vintage 92.

Re: Plinking with my 20" 45 Colt

Posted: 07 Aug 2019 13:03
by Oldman11
I have one of the real old ones in .45colt,mighty fine shooting iron.

Re: Plinking with my 20" 45 Colt

Posted: 08 Aug 2019 04:52
by GasGuzzler
The one pictured in this topic is not the old style gun but the treatment of the wood sure makes it look vintage ... which I favor.

Re: Plinking with my 20" 45 Colt

Posted: 08 Aug 2019 11:45
by Sarge
Thanks a bunch guys. I did the same thing with that lemon .357 I had a few years ago, and really liked the outcome.

Image

This 45 has been a great 92 so far and I figured it deserved the same treatment.

Re: Plinking with my 20" 45 Colt

Posted: 08 Aug 2019 13:35
by ddj
There's a number of 45 Colt 92"s on Gunbroker. I have 2 and love both of them

Re: Plinking with my 20" 45 Colt

Posted: 19 Aug 2019 08:05
by Sarge
The New Vaquero was a nice 45 Colt, but not up to the loads I shoot in this '92. A factor in its departure was the fact I caught myself slipping a '45-70 Lite' load in the cylinder one day, while shooting it and the carbine. I'd decided to go back to a large frame 'Old Vaquero' and for some time have been looking for a pristine example with the 4 5/8" barrel. I could find good candidates but the screws had been buggered, sights filed etc.

I finally found a mint '99 Vaquero on Gunbroker. After going over it inside and out, there is no indication it was ever fired. No screw on it has ever had a screwdriver in it. The trigger pull is 3# measured at the tip of the trigger- no creep and damn little over-travel. The action is crisp and precise, lockup ls tight. I didn't have time to measure the barrel-cylinder gap but it is tight. I hope the Ruger employees who put this together didn't get canned for letting out a top notch piece.

Image

About the only thing 'predictably Ruger' was its .450 cylinder throats and that's easily corrected. Shooting over one knee at 50 yards, it put a cylinder-full in just under four inches.

Re: Plinking with my 20" 45 Colt

Posted: 19 Aug 2019 19:29
by Mad Trapper
that be a real nice setup with the ruger and the 92.
And 45 colt can do it all

Re: Plinking with my 20" 45 Colt

Posted: 20 Aug 2019 05:50
by GasGuzzler
I looked for an Original Vaquero .45C blued/CCH locally for three years but the 2-3 I found were incredibly overpriced for a Ruger (in the $600-700 range) so when I found a Uberti Cimarron Evil Roy in the same range I bought it instead...and no transfer bar.

I still haven't found my .45C R92. I'm picky and generally only buy from individuals.