new model 92 questions

The Rossi Model R92, a lightweight carbine for Cowboy Action, hunting, or plinking! Includes Rossi manufactured Interarms, Navy Arms, and Puma trade names.
twoshotc
Posts: 15
Joined: 12 Nov 2013 14:28
Location: south carolina

new model 92 questions

Post by twoshotc »

I just got my model 92 in .357. I cleaned it up as suggested here and shot a few rounds in 38 and 357. the 38s loaded smoothly but the 357s also worked. I was relieved that it would chamber my reloads in 158 gr. 357mag. About everything I have read here seemed to be true with the new rifle. I got my finger bleeding trying to get the bullets into the mag. The brass shot over my head with I chambered a new round. Nothing unexpected since I had read most of the post on this forum.
I will start the process of improving the 92 as suggested here. I would like to start by cutting down the length of the magazine spring. I could only get about seven rounds in the magazine before it became difficult. It is a twenty inch barrel. What are your suggestions as to how much to cut off the spring?
I will continue to get advice here and look forward to getting the Rossi model 92 to be slick and dependable.
thanks
charles
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: new model 92 questions

Post by akuser47 »

Well sounds like you have a nice one. A tune up can help you with the brass ejection and smoothing of action. Can you afford steves dvd it can greatly add you in tuning the rifle. Keep us posted to yuor path.
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
donhuff
1000 Shots
1000 Shots
Posts: 1650
Joined: 03 May 2013 10:14
Location: LaGrange Georgia
Has thanked: 7 times
Been thanked: 339 times

Re: new model 92 questions

Post by donhuff »

twoshot,

I take the plug out of the end of the mag tube and leave the spring in there. I measure up from the end of the tube 2 1/2 to 3 inches, and cut the spring there. I have done 3 of mine that way and they all work just fine.
I have also put the gunslinger spring kit in two of them and I really like the way they feel now.
Don Huff

to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
Johnz
Posts: 74
Joined: 04 Oct 2013 05:18
Location: NM
Has thanked: 34 times
Been thanked: 4 times

Re: new model 92 questions

Post by Johnz »

I just bought my 1st Rossi levergun a couple of months ago and reading all this stuff on this forum since then is making me want another. Da*n you guys. :x
Model 52
250 Shots
250 Shots
Posts: 338
Joined: 04 Feb 2013 18:29
Location: NC
Has thanked: 8 times
Been thanked: 122 times

Re: new model 92 questions

Post by Model 52 »

3 cartridge lengths of spring past the end of the mag tube seems to work pretty well regardless of caliber.

Swapping the ejector spring for a lighter one will fix the excessive ejection forces and make the action cycle smoother.

You can also grind about a 1/3rd of the width off the spring on the loading gate which will also make loading a lot easier. Hold it in your fingers and dip in water as needed to keep it cool. That will prevent you from getting it too hot and ruining the temper of the spring. If you are not good with a bench grinder or dremel tool, use a file. Just keep the curves smooth to avoid any stress risers.

Any time you modify Rossi parts proceed carefully and keep in mind that replacements are hard to get…
User avatar
Ranch Dog
Site Admin
Site Admin
Posts: 9398
Joined: 23 Jan 2012 07:44
Location: Inez, TX
Has thanked: 1837 times
Been thanked: 2281 times

Re: new model 92 questions

Post by Ranch Dog »

Welcome twoshotc, seems that you are getting the advice you need... Thanks guys!
Johnz wrote:I just bought my 1st Rossi levergun a couple of months ago and reading all this stuff on this forum since then is making me want another. Da*n you guys. :x
Aahh. that is just the price of attendance John!
Michael
Image
twoshotc
Posts: 15
Joined: 12 Nov 2013 14:28
Location: south carolina

Re: new model 92 questions

Post by twoshotc »

I followed the instructions and cut back the magazine spring. That was a big help! The brass does fly everywhere and since I reload I have to fix this. I ordered a spring kit. The trigger pull is heavy but there is no take up or slack. I am not satisfied with the accuracy so I ordered a barrel sight from Skinner. I believe that will help since I use peep sights on other rifles. I will see how the sights work and then start adjusting the reloading. I do not care for the red stock so I got a stock refinishing kit.
As you folks say-- the Rossi model92 is a kit gun and that is OK
twoshotc
Posts: 15
Joined: 12 Nov 2013 14:28
Location: south carolina

Re: new model 92 questions

Post by twoshotc »

Update I got the gunslinger springs. I have not been successful in getting that extra long ejector spring in yet. Of course I had a devil of a time getting it back together after the first cleaning and spring changes.
I did go ahead and ordered the steve gunz video. It came in yesterday. While I was waiting, I refinished the stock and it looks much better. I ordered a Skinner sight and installed it. The POI was way to the left and low. I raised the Shinner sight as high as it would go but it still shot low. I moved the skinner sight as far as I wanted to but it still shot to the left. So I decided to drift the front sight just a little. With the smallest tap, the sight just fell out of the dove tail. So work on my "kit" gun continues
I used some lock tight to put the front sight back in. Since it is no longer adjustable, I have to move the rear site some more. I have not done this yet. I did put a thin brass shim under the rear sight and that brought the poi up to the right level. I had already adjusted the site up as far as it would go.
I am lucky to have a backyard range and I reload or I would not be anywhere close to having a functional rifle. Next I will learn all I can from Steve cd and then get it slicked up.

The project continues
donhuff
1000 Shots
1000 Shots
Posts: 1650
Joined: 03 May 2013 10:14
Location: LaGrange Georgia
Has thanked: 7 times
Been thanked: 339 times

Re: new model 92 questions

Post by donhuff »

twoshots,
watch this video and notice how he has the bolt C-clamped to the table. That's the only way I could get my ejector/bolt back together. If I had two more arms and hands I think I might could have done it without the clamp. Also, it won't just snap back in, it took a lot of force and I think a tap with the hammer and punch too. Once you get the spring and collar in place and put the lever/bolt pin in, it is easy from then on.

I think some say to cut a piece of beer can and put it under the sight in the dovetail to tighten it up. I used a center punch to tighten a couple of mine.

Don Huff

to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
User avatar
Rooster59
Founding Member
Founding Member
Posts: 366
Joined: 08 Jul 2012 21:51
Location: East Central Missouri
Has thanked: 184 times
Been thanked: 33 times

Re: new model 92 questions

Post by Rooster59 »

I have never been any good at peening a dovetail sight to get it tight. I've resorted, successfully, to adding a thin skin of JBWeld to the bottom of the sight then filing it smooth the next day until it just goes in with light tapping with a punch and small hammer.
"I come from a state that raises corn and cotton and cockleburs and Democrats, and frothy eloquence neither convinces nor satisfies me. I am from Missouri. You have got to show me." Willard Duncan Vandiver
Post Reply